Release Date: May 08, 2013
Firmware Version Required : 10.3.50
*** Only Available via the AutoUpdate Server ***
Lumia WP8 Recovery Flashing Added
All Lumia WP8 Phones
This will allow re-flashing of Lumia Phones which encountered an error during a previous firmware update (incomplete flashing). This will only work if BOOT Loaders are still OK.
To perform recovery flashing:
1. Run ATF Software, load the flash WP8 Flash File and click FLASH.
2. Hold VOLUME_DOWN + POWER button until the phone will vibrate.
3. Release VOLUME_DOWN + POWER button then connect USB Cable.
4. Recovery Flashing will start and will Fix Partitions.
BB5 Read Firmware Version via Flash Mode
All Single-CPU BB5 Phones (RAP3, RAPIDO, RAPUv1, RAPUv2, Broadcom and XG223)
This will allow you to know the current firmware version inside the phone just in case the phone is dead. It will also prevent you from accidentally DOWNGRADING any BB5 Phone. USB and FBUS Connection are both supported.
To check current firmware version:
1. Click "Buscheck" or "Backup RPL" Button
Added Alternative USB Boot Method in Settings
In Settings --> Nokia Settings, check this:
Use BB5 USB Boot Settings Type 2 (Fixes Booting Problem on some PC)
If you get BB5 Booting Problems stuck at:
"FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)"
* Complete Product Listing in Nokia.ini (as of May-08-2013)
Update SPD Android IMEI Write
(Now 95% SPD Android phone Supported for imei repair !!)
MTK Bug Fixed
MediaFire / Hotfile
Please share here all your tested preloader mode tested TestPinouts ....
Little Guide :
What is it ?
in MTK Android there is many Partitions in your phone. like Preloader, Recovery, Bootimg etc..... if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.
How Preloader get corrupted ?
There could be few reasons but main reason could be that someone or you Flash your complete phone (include Preloader) with wrong files or with wrong ver. Also there could be reason someone Delete Preloader or you Deleted.
How could i know my phone have preloader dead ?
Preloader can be dead if some one Flash it wrong and after flash your mobile will not detect with pc any more. for confirm
open device manager
take battery out from phone
and check is computer detecting any device
If it's not detect then you have phone which Preloader is dead AKA Boot Dead
How can i repair it ?
you have to disassemble your phone and take pcb out. check there should be some Golden points. check these points there should be written on them Rx,Tx,GND,Vcc,Vcharge etc... check there should be written "COLO" or "KOLO" or "KCOLO" you have to Sold that point with GND After Sold Attach usb now your phone will detect with USB !! and now ready to Flash.
In some phones "COLO" or "KOLO" or "KCOLO" not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc is Force Preloader Mode Test Point !! Keep in mind Don't Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested "Colo" or "Kolo" or "KCOLO" don't have any kind of volts..
Download via mediafire
download via hotfile